As a skid steer loader manufacturer and supplier in China, Changlin offer wheel loader, road roller, crawler excavator, backhoe loader, motor grader, skid steer loader is commonly known as a skid loader, is typically four-wheel drive heavy equipment vehicle, always be referred to as a kind of construction machinery/construction equipment.
Features of Skid Loader
1. The skid loader is equipped with reliable CATERPILLAR 3306B license engine or genuine Cummins engine
2.The skid loader has three forward and three reverse power shift transmission
3. Bucket of skid loader has automatic leveling ability
4. Combined seal cylinder obtains high seal performance and more reliability
Applications of Skid Steer Loader
As a type of construction engineering machinery and equipments, skid loaders have a wide variety of applications, usually they can push material from one location to another, carry material in its bucket or load material into a truck or trailer in such construction sites as building, road-making , warehouse-building. In addition, Changlin skid steer loaders can work on the deck or in the cabin and job sites where does not allow large construction machinery.
Specifications of Skid Steer Loader:
| Overall Dimension | |||||||||||||||||
| 1 | Length(with bucket on ground) | 3270(mm) | |||||||||||||||
| 2 | Width(to outside of wheels) | 1760(mm) | |||||||||||||||
| 3 | Bucket width | 1850(mm) | |||||||||||||||
| 4 | Height(To the top of the cab) | 1946(mm) | |||||||||||||||
| 5 | Wheelbase | 1110(mm) | |||||||||||||||
| 6 | Tread | 1454(mm) | |||||||||||||||
| 7 | Min. ground clearance | 210(mm) | |||||||||||||||
| Main Technical Specification | |||||||||||||||||
| 1 | Rated load | 900(Kg) | |||||||||||||||
| 2 | Operating weight | 3667KG | |||||||||||||||
| 3 | Rated bucket capacity | 0.5(m3) | |||||||||||||||
| 4 | Max. breakout force | 28kN | |||||||||||||||
| 5 | Static tipping loads | ≥20kN | |||||||||||||||
| 6 | Max. dump clearance | 2425(mm) | |||||||||||||||
| 7 | Dump reach | 553(mm) | |||||||||||||||
| 8 | Dump angle at any position | ≥400 | |||||||||||||||
| Angle of departure | 300 | ||||||||||||||||
| 8 | Digging depth(with bucket bottom horizontal) | 0(mm) | |||||||||||||||
| 9 | Min. turning radius | ||||||||||||||||
| (1) Outside of bucket | 2030(mm) | ||||||||||||||||
| (2) Outside of front wheel | 1295(mm) | ||||||||||||||||
| (3) outside of rear frame | 1500(mm) | ||||||||||||||||
| 10 | Pivot angle frame | 400 | |||||||||||||||
| 11 | Oscillating angle of rear axle | ±12° | |||||||||||||||
| 12 | Lifting time of bucket | ≤4.8(sec.) | |||||||||||||||
| 13 | Lowering time of bucket | ≤6.7(sec.) | |||||||||||||||
| 14 | Dumping time | ≤2.1(sec.) | |||||||||||||||
| 15 | Traveling speed(Km/h),1forward and 1 reverse | ||||||||||||||||
| (1) forward gear | 0～11 | ||||||||||||||||
| (2) reverse gear | 0～11 | ||||||||||||||||
| Diesel engine | |||||||||||||||||
| 1 | Model | Cummins B4.5-C80 0 | |||||||||||||||
| 2 | Type | Direct injection. Turbocharge. Water cooling | |||||||||||||||
| 3 | Rated output | 59 (kW) | |||||||||||||||
| 4 | Inter-bore of cylinder/stroke | 114/135(mm) | |||||||||||||||
| 5 | Total exhaust of cylinder | 8.3 (L) | |||||||||||||||
| 6 | Model of starting motor | 42MT | |||||||||||||||
| 7 | Power of start motor | 8.2(KW) | |||||||||||||||
| 8 | Voltage of starting motor | 24(V) | |||||||||||||||
| 9 | Rated speed | 2200(r/min) | |||||||||||||||
| 10 | Max. Torque | 998(N.M) | |||||||||||||||
| 11 | Starting type | Electric | |||||||||||||||
| 12 | Min. specific fuel consumption | 207(g/Kw.h) | |||||||||||||||
| 13 | Engine specific oil consumption | 0.9-1.6(g/Kw.h) | |||||||||||||||
| 14 | Net weight | 617(kg) | |||||||||||||||
| Power train | |||||||||||||||||
| 1. Driving system | |||||||||||||||||
| 1 | Model | Hydrostatic driving | |||||||||||||||
| 2 | Type | Driving pump+driving motor+reducer | |||||||||||||||
| 3 | Torque ratio | 2.55 | |||||||||||||||
| 4 | Cooling type | Pressure oil circulating | |||||||||||||||
| 2. Transmission case | |||||||||||||||||
| 1 | Model | CHANGLIN Z50H.4 | |||||||||||||||
| 2 | Type | Power shift, spur gear constant- mesh | |||||||||||||||
| 3 | Gear shift position | 3 Forward and 3 reverse gears | |||||||||||||||
| 3. Axle and Tire | |||||||||||||||||
| 1 | Type of main reducer | spiral bevel gear, single stage | |||||||||||||||
| 2 | Gear ratio of main reducer | 4.625 | |||||||||||||||
| 3 | Type of final reducer | Single stage planetary | |||||||||||||||
| 4 | Gear of ratio of final reducer | 4.9286 | |||||||||||||||
| 5 | Gear ratio | 22.795 | |||||||||||||||
| 6 | Max. drawing force | 137kN | |||||||||||||||
| 7 | Size of tire | 23.5-25-16PR | |||||||||||||||
| Working Device Hydraulic System | |||||||||||||||||
| 1 | Model of oil pump | CBGj 3100 (For C6121) | CBGj3100/2024 (For Cummins) | ||||||||||||||
| 2 | System pressure | 200(kgf/cm2) | |||||||||||||||
| 3 | Model of distribution valve | HUSCO | |||||||||||||||
| 4 | Pilot valve | HUSCO | |||||||||||||||
| 5 | (D*L)Dimension of lifting cylinder | Ф160*90*740(mm) | |||||||||||||||
| 6 | (D*L)Dimension of tilting cylinder | Ф180*90*500(mm) | |||||||||||||||
| SteeringSystem | |||||||||||||||||
| 1 | Type | Middle articulated frame. Co-axis flow amp. Steering | |||||||||||||||
| 2 | Model of steering pump | CBGj 2063/ Gb 1016 | |||||||||||||||
| 3 | Model of redirector | Danfoss OSPB1000LS | |||||||||||||||
| 4 | System pressure | 14MPa | |||||||||||||||
| 5 | Dimension of steering cylinder | Ф90*45*435(mm) | |||||||||||||||
| Brake System | |||||||||||||||||
| 1 | Type of travelingbrake | Caplier disc brake Air over oil activate 4 wheel brake | |||||||||||||||
| 2 | Air pressure | 7-8(kgf/cm2) | |||||||||||||||
| 3 | Type of emergency brake | Manual control cutting-off air brake | |||||||||||||||
| 4 | Type of parking brake | inner expand hoof Automatic boosting. inner expand hoof | |||||||||||||||
| Oil Capacity | |||||||||||||||||
| 1 | Fuel(diesel) | 250(L) | |||||||||||||||
| 2 | Engine lubricating oil | 20(L) | |||||||||||||||
| 3 | Oil for converter and gear box | 42(L) | |||||||||||||||
| 4 | Oil for hydraulic system | 180(L) | |||||||||||||||
| 5 | Oil for driving axles(F/R) | 36(L) | |||||||||||||||
Skid Steer Loader
Specification Download
print